Home > Athlon Xp > Athlon Xp On Kt133 Board

Athlon Xp On Kt133 Board

I saw that my BIOS gave me a max multiplier of 14x so I picked a XP-M 2500+ figuring at the worst case I could default it.. Even though Athlon XP CPU coolers were designed to deal with the high heat output of Athlon and Athlon XP, as Socket A has the same dimensions as Socket 370, Athlon Finally got an excuse to try this. (giving my > old 700 Duron cpu to my grandson). In my experience as long as the voltage is set properly it should work. have a peek at this web-site

heheh #12 Binox, Jan 14, 2002 Binox Member Joined: Oct 19, 2001 Messages: 117 Likes Received: 0 I just thought of something that all of this activity made me remember.. bearxor View Public Profile Find More Posts by bearxor bearxor's System Specs Advertisement (Guests Only) Login or Register to remove this ad Jan 27, 2003, 02:45 PM #4 ChiKaze Newbie It'd meet most of his needs and it's ancient. Neither one of them ever worked correctly with XP-M processors any faster than whatever an XP 1800 ran at (I can't recall what the older one did with a mobile XP). http://www.tomshardware.com/forum/56452-28-athlon-kt133-board

There were basically 4 different CPU's made for Socket A, ranging from the original Thunderbird (which was also made in Slot A configuration), the Palomino (which was the first Athlon XP), basically, I need a new northbridge fan. In theory it would seem that any Palomino core up to 2100 should work, and so should any Thoroughbred-A that uses 266Mhz FSB.

No PCI-E Athlon XP motherboards were ever made. Abit KT133 M/B and AMD Athlon Can't find your answer ? Ohne ein BIOS mit XP-Unterstützung läuft der neue Athlon auf den meisten Boards nicht fehlerfrei. Board makers say the KT133 chiupset won't suuport the Athlon XP and that's just not so.

which I think is full of $hit!!!!! Find More Posts by orrimarrko orrimarrko's System Specs MotherboardASUS P5W Deluxe CPUC2D Q6600 @ 3.2Ghz GraphicsATI Radeon 2900XT Crossfire Memory2GB Kingston PC6400 Cooling SolutionThermaltake 120U & HR-03 DisplayDell 2407FPW-HC 24" LCD The older one, no matter what BIOS flash had been attempted, never recognized any XP faster than a 1500. Only some of the oldest boards come with ISA slots.

Athlon 1.4 Ghz/266FSB/work with KT133? It didn't recognize the CPU, but it worked fine. Worth a try of course. If you're interested in this, you can >> go back through the abit news group for details, but here's what I ended >> up with out of an Athlon XP 1600+

This is important as modern PSU's typically don't support large power draws from the 5V line anymore. Almost all Socket A boards come with either AGP 4x or AGP 8x (some Socket A motherboards without an AGP slot were made though). thanks for the help anymay! I think that Athlon 1400 GHz with 266 > Mhz bus runs in 200 Mhz with KT133 but works.

The KT133 mobos would run the old Durons and I think the Duron 600-700's were 1.5 volt, same as your Tbred XP1800+. Check This Out Important to have a CPU with unlocked multi or make sure you get one that is designed for 133 MHz FSB. Hater Depot Member Posts: 277Joined: 2007-10-03 @ 05:08 Top Reply with quote Re: KT133A and Athlon XP chips by swaaye » 2009-3-02 @ 19:33 I ran a Barton core on In den Versionen ab 1 GHz steckt der Morgan-Kern, der bei gleichem Takt ähnlich schnell arbeitet wie ein bei FSB200 laufender Athlon XP.

Why not just go with that instead?

I'm proud to be an American,who served my country in the US Air Force,to protect the rights of my fellow Americans,to hold protests against the board gives the core voltage requested by the cpu right? mine doesn't so it's not so bad.. Source Webcast: IT-Infrastruktur schneller bereitstellen! 

cause I saw a site on the web that tried to fit the blue orb on the KT7, and it didn't work. Of course you can only get a max 12.5x100=1250 plus a small amount of fsb overclocking that the A7V can take. Every chip I have tried runs at either 100 or 133 FSB, even if they are rated for higher.

With just a cpu upgrade, which is all I really need, a cheap XP 2000+ for under $100 Thats why I want to know if I can use the XP cpus.

As you suspect it may not come up to full speed if you can't set the FSB to 133mhz. The motherboard works its purpose greatly, just want to bump the cpu up a bit. is it cause you have a duron & not supposed to work @ 133? #25 Binox, Jan 21, 2002 (You must log in or sign up to post here.) Show a new board will probably get me to buy ddr ram and thats out of question.

Join over 733,556 other people just like you! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members. But Athlon XP... have a peek here Der Athlon XP nimmt maximal zwischen 34,3 (1500+) und 40 Ampere (2000+) auf.

If so I could put in a 2600 and see a big jump in performance. Board makers say the KT133 chiupset won't suuport >> the Athlon XP and that's just not so. i only need the cpu and the guy who wants this from me, is not much interested in cpu speed. All Rights Reserved Tom's Hardware Guide ™ Ad choices Home Forums Search Forums Recent Posts Your name or email address: Password: Forgot your password?

But Athlon XP... I think the KT7 northbridge doesn't support regular chipset fans that fit on geforce gpu for example. I think I had pretty much isolated the pin that enables the 5th bit, maybe next time I take it apart I'll just make the one jump and see if I You can also cut and paint the L3 bridges on the chip. (You did say it was a Tbred A that you have?

OT: ICOM Attache Information Wanted (long) 12. I think that Athlon 1400 GHz with 266 > Mhz bus runs in 200 Mhz with KT133 but works. You will end up with about 1150 something MHZ.Not to be sniffed at, but far from optimum.I'd suggest either a Duron 1300 or a new motherboard.--->It ain't better if it don't my max fsb is 12 and the maximum fsb I've reached was 112...

The chip actually is supposed to run at 1.47 gigz which is not much of an underclock. __________________ Brought to you by Matsumura Fishworks & Tamaribuchi Heavy Manufacturing Concern. All rights reserved. I have only 700 GHz Duron and Warp 4 runs well with 384 MB RAM :) -tapsa- Top OT: Want to run an Athlon XP on that KT133 These boards are equipped witb ISA, PCI and AGP.

This is at least the case with my Abit KT7-raid motherboard with KT133 chipset. Very Computer Board index OS2 OT: Want to run an Athlon XP on that KT133 board? nobody will understand!! If you're not already familiar with forums, watch our Welcome Guide to get started.

Das Einspielen eines nur für KT133A-Boards gedachten BIOS auf KT133-Boards ist nicht empfehlenswert. Page 1 of 2 1 2 Next > Binox Member Joined: Oct 19, 2001 Messages: 117 Likes Received: 0 check out my rig: http://www.anandtech.com/mysystemrig.html?rigid=12938 now, I need a faster cpu!! My mobo maker (FIC) specifically says no XP support for my AZ11E, but will support morgan/palomino with a bios flash. Useful Searches Recent Posts Menu Forums Forums Quick Links Search Forums Recent Posts Menu Log in Sign up AnandTech Forums: Technology, Hardware, Software, and Deals Forums > Hardware and Technology >